GW Instek PEL-2000A Series - Adjusting the Display Settings

PEL-2000A Series User Manual
212
4. Press the Selector knob to edit
Speaker, then turn to change
from On to Off and vice versa.
Speaker ON
5. Press the Selector knob or Enter
to confirm selection.
OR
ENTER
Adjusting the Display Settings
Background
The PEL-2000A series has a TFT LCD display. The
display brightness and contrast can be controlled
via the utility menu.
Parameters
Brightness
50~90
50(low)
90(bright)
Contrast
3~13
3(low)
13(high)
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5
ConfigureOther
Other Setting
Speaker
Contrast
Brightness
Frame CONT
Alarm Tone(M)
ON
8
64
OFF
OFF
Load Interface
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50