GW Instek PEL-2000A Series - Rack Mount Installation

GETTING STARTED
41
Rack Mount Installation
Background
The PEL-2004A can be used in a standard 19” rack
mount enclosure with the optional rack mount kit
(part no. 11EL-20040201). Each unit requires a rack
height of 4U with a 1U space for ventilation top
and bottom. The rear of the rack mount enclosure
must be free of obstruction to allow heat to
dissipate from the mainframe(s).
Steps
1. Screw the rack mount brackets as shown
below using the supplied bolts.
PEL-2002A
PEL-002
2. Insert into a standard 19” rack enclosure with
at least 1U of space top and bottom for
ventilation.
1U
1U