GW Instek PEL-2000A Series - Setting the CC Voltage Range

OPERATION
185
OPP
OTP
CPP
UVP
Panel operation
Ensure the menu is in the
configuration menu. See page 180.
Configure
Previous
Menu
Protection
Go-NoGoOther Group
1. Turn the load off by pressing the
load key if necessary.
ON /
OFF
LOAD
2. Use the selector knob to scroll
down to Protection Clear.
Protection Clear All
3. Press the Selector knob or Enter
to clear all.
OR
ENTER
Note
The configuration settings only apply to the current
channel, other channels will not be affected.
Setting the CC Voltage Range
Background
The Constant Current Voltage range can be set to
high or low.
Parameter
CC Vrange
High/Low
Panel operation
Ensure the menu is in the configuration menu. See
page 180.
Configure
Previous
Menu
Protection
Go-NoGoOther Group