GW Instek PEL-2000A Series - Channel Selection

OPERATION
127
4. Press F5 to exit.
F5
Channel Selection
Background
There are up to 2 channels per load module,
depending on the model. The main display can be
used to control each channel individually.
When Group Unit Mode is enabled, channel selection
is disabled. See page 120 for details.
Mainframe
Channel selection
1. Press the CHAN button.
LOCAL
CHAN
2. Select a channel by turning the
Variable knob.
The channel selection appears highlighted in
orange on the top right of the screen.
CCDH
ConfigureConfigure
Mode
CC
Dynamic
Range
High
Level2
SlewRate
SlewRate
Timer1
Timer2
Level1 0.80
0.50
0.80
0.80
0.025
0.025
A
A
A/uS
A/uS
mS
mS
main
80V
CH1
06/15/18
16 : 50
3. Press the Selector knob or Enter
to confirm.
OR
ENTER