If you try to recall data that originated from a different
load module than the active channel, an error message
will appear. The filename must reflect the active
channel’s load module type.
There are two options to save or recall Channel
Presets to a USB flash drive:
Save Chan Current: Saves the active Channel’s
Presets (P0~P9) into the root directory
(20XXX_XX.P). Press F5 (File Utility) to select the
directory to save.
Save Chan All: Every channel’s Presets (CH1 P0~P9
~ CH8 P0~P9) will be saved into a directory
(ALL00XX) as separate files for each channel
(P0X0X_C1.P ~ P0X0X_C8.P)
Recall: Recalls the selected file to the active
channel’s Presets (P0~P9). It is not possible to
update all the channels at once, only one channel at
a time can be recalled.
The file extension *.P is used for channel Presets
only.
For more information about the file structures see
page 94.
To Next Page
Loading...
