GW Instek PEL-2000A Series - Accessing the Load Menu

PEL-2000A Series User Manual
210
Accessing the Load Menu
Background
The PEL-2000A series is able to automatically start
loading from the last program or load setting.
If Auto Load On is set to Load, the last load setup
used before the machine was reset will
automatically start to load upon startup.
If Program is set as the Auto Load On
configuration, the last program executed will start
upon the next start up.
Parameters
Auto Load
ON/OFF
Auto Load On
Load/Program
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F2 (Load).
F2
ConfigureOtherInterfaceLoad
OFF
Load
O
Auto Load On
Load Setting
Auto Load
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50
3. Press the Selector knob, then
turn to choose Auto Load.
4. Press the Selector knob or Enter
to confirm selection.
OR
ENTER