GW Instek PEL-2000A Series - Recall Preset Memory (Frame Link)

OPERATION
275
Recall Preset Memory (Frame link)
Background
A master mainframe can command all units to
recall preset memory from their internal memory.
Only the first three preset memories (P0~P2) can
be recalled.
Channel presets can be recalled via the file menu
or using the quick recall feature using the number
pad.
Parameters
Presets
P0 ~ P2 (current channel)
Panel Operation:
Quick Keys
1. Remove any USB devices from
the front panel.
2. On the master mainframe, press
the Shift and Preset key.
PRESET
SHIFT
3. Press one of the number keys (0-
2).
0 = P0
1= P1 etc
0
P0
The screen will flash momentarily when the
presets are recalled.
Panel Operation:
File menu
4. On the master mainframe follow
the procedure to recall preset
memory for all channels.
Page 246
The screen will flash momentarily when the
presets are recalled.
Note
It is necessary to save preset data before recalling both
master and slave. If preset data is not saved first, the
value after recalling will be the factory default setting.