GW Instek PEL-2000A Series - Adjusting the Speaker

OPERATION
211
5. Scroll to Auto Load On and choose Load or
Program for the next time the PEL-2002A
starts up.
Adjusting the Speaker
Background
The PEL-2000A series has an internal speaker for
both the mainframe and load modules. The
speaker function turns On/Off the sound for the
UI (key presses and scrolling). The speaker setting
will not alter the sound for protection alarms or
Go/NoGo alarms.
Parameter
Speaker
ON/OFF
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5
Configure
Time Set
Other
Other Setting
Speaker
Contrast
Brightness
Frame CONT
Alarm Tone(M)
ON
8
64
OFF
OFF
Load Interface
LOAD
USB
System
Info
06/15/18
16 : 50
3. Use the Selector knob to
highlight Speaker.