GW Instek PEL-2000A Series - Configuring Go;Nogo Alarm Sound

PEL-2000A Series User Manual
218
4. Press the Selector knob to select
the master alarm (Alarm Tone
(M)), turn to edit and press to
confirm selection.
Alarm Tone(M) ON
5. Repeat the steps to edit the slave alarm
(Alarm Tone(S)).
Configuring Go/NoGo Alarm Sound
Background
When any Go/NoGo limits are tripped from any
channel, a tone can be set as an alarm.
The Go_NoGo tone alarm settings apply to all
channels.
Parameter
Go_NoGo Tone
ON/OFF
Panel operation
1. Press the Shift Key then the Help
key to access the Utility menu.
UTILITY
HELP
SHIFT
2. Press F5 (Other Menu).
F5
ConfigureOther
Other Setting
Alarm Tone(S)
Knob Type
Go_NoGo Tone
Slave Knob
Language
OFF
Updated
OFF
SetValue
English
Load Interface
LOAD
USB
Time Set
System
Info
06/15/18
16 : 50