GW Instek PEL-2000A Series - Page 188

PEL-2000A Series User Manual
188
3. Press the Selector knob to edit
the selected value, then turn
to increase or decrease the
value.
OR
Use the number pad to enter
a number.
CAL.
987
3
CLEAR
21
0
4 5 6
P0 LOCK
P3P1 P2
P6P4 P5
P9P7 P8
Von Voltage 0.00
V
4. Press the Selector knob or
Enter to confirm selection.
OR
ENTER
5. Repeat steps 3 to 5 to turn Von Latch ON or
OFF
For details about Von and Latch settings please see
page 86.
Note
The configuration settings only apply to the current
channel, other channels will not be affected.