GW Instek PEL-2000A Series - Page 199

OPERATION
199
Note
Use the Shift key to toggle between coarse and fine
adjustment mode when editing the CC, CR, CV and
CP values with the Selector knob on the main display.
The fine adjustment resolution varies between the
function and load module used.
Coarse mode:
SHIFT
+
Fine mode:
SHIFT
+
Panel operation
Ensure the menu is the configuration
menu. See page 180.
Configure
Previous
Menu
Protection
Go-NoGoOther Group
1. Press the F2(Other) key to enter
the Other menu.
F2
Configure
Previous
Menu
Protection
Go-NoGo
CH1
Other
Response
CCH Step
CRH Step
CRL Step
CVH Step
Mormal
0.002
0.00080
0.00080
0.2
A
Ω
Ω
V
CCL Step 0.0010
A
conf
CCDH
80V
LOAD
USB
Group
06/15/18
16 : 50
2. Use the Selector knob to scroll
down to highlight CCH Step.
Note
CCH Step is off-screen when entering Other menu.