GW Instek PEL-2000A Series - Page 288

PEL-2000A Series User Manual
288
Pin5
Sync._MEM_1
Output, Sync signal,
Recall Setup memory 1
(All channels)
Pin6
Sync._MEM_2
Output, Sync signal,
Recall Setup memory 2
(All channels)
Pin7
Sync._MEM_3
Output, Sync signal,
Recall Setup memory 3
(All channels)
Pin8
Sync._MEM_4
Output, Sync signal,
Recall Setup memory 4
(All channels)
Pin9
Sync._Enable
Output, Sync signal,
Enable Load (On/Off),
recall Preset memory (0-
2) and Setup memory
(1-4)
Pin10
Sync._Load
On/Off
Output, Sync signal,
Load On/Off
Pin11
N.C
No connection
Pin12
N.C
No connection
Pin13
N.C
No connection
Pin14
N.C
No connection
Pin15
Load Status
Output, load on status.
Pin16
Alarm Status
Output alarm activated.
Pin17
N.C
No connection
Pin18
+5V
Power source output,
+5V, 100mA
Pin19
GND
Ground
Pin20
GND
Ground