GW Instek PEL-2000A Series - Page 49

GETTING STARTED
49
4. Close the terminal cover securely. Ensure the
wires are secured properly and that the wires
are not exposed when the cover is in place.
WARNING
Ensure that the wires are tied or twisted together to
prevent noise and inductance.
CAUTION
Ensure the polarity is correct before proceeding with
any connections. Using the wrong polarity could
result in reverse voltage damage.
L
80V DC
MAX MAX
80V DC
R
DUT
Ensure the input voltage doesn’t exceed
specifications. Exceeding the voltage specifications
could result in damage to the instrument.