GW Instek PEL-2000A Series - Page 75

OPERATING DESCRIPTION
75
Run
Sets the running configuration for
the current sequence. The
sequence can be skipped, run or
run manually only.
Range: Auto | Skip | Manual
On-Time
Sets the Sequence Run On-Time
Range: 0.1 ~ 60.0s
Off-Time
Sets the Sequence Off-Time
Range: Off | 0.1 ~ 60.0s
Short-time
Sets whether the Short-Time for
the sequence.
Range: Off | 0.1s ~ On-time
P/F-Time
Sets the Pass/Fail time for the
sequence
Range: Off | 0.1 ~ (On-Time+Off-
Time)-0.1s
Short Channel
Selects which channel will be
shorted during the sequence
Range: CH1 ~ CH8
Program
Sequences are run sequentially to create a
Program. There are 10 Sequences in each Program.
1 2 3 4 5Sequence
Program 1
(P01)
6 7 8 9 10
If less than 10 Sequences are desired for a Program,
any additional Sequences can be skipped (not run).
1 2 3 4 5Sequence
Program 1
(P01)
6 7 8 9 10
Sequence 2 & 3 are skipped.