GW Instek PEL-2000A Series - Page 98

PEL-2000A Series User Manual
98
Save/Recall USB
In order to save data from a single channel to USB,
data must first be saved to the internal memory.
After data is saved to internal memory, all the files
can be saved to USB.
USB
Memory Data
M001
M002
M003
M004
M117
M118
M119
M120
~
File.M
M001
M002
M003
M004
M117
M118
M119
M120
Channel X
Internal Memory
Current
Channel
Memory Data
To recall saved files, the reverse is also true. Files
must be recalled from the USB flash drive to
internal memory. Then from internal memory the
data can be recalled to each channel*.
*Excluding SEQ data.
Save/Recall All
The SEQ, Preset, Memory or Setup data can be
saved from every channel into USB. SEQ, Preset
and Memory data is saved into a directory
(ALL0000-ALL0099) with a file for each channel,
whilst Setup data is saved in a single file.
USB
CH1 Memory
M001
M002
M003
M004
M117
M118
M119
M120
~
CH8 Memory
M001
M002
M003
M004
M117
M118
M119
M120
~
File_CH8.M
M001
M002
M003
M004
M117
M118
M119
M120
~
Save All Channels
File_CH1.M
M001
M002
M003
M004
M117
M118
M119
M120
~
~~
ALL0000 (Directory)
To recall saved files, the reverse is not true. Files
must be recalled to each channel separately.