Hamilton G5 - Hardware options; Set up CO2 sensor monitoring; SpO2 monitoring options; Installing the pneumatic nebulizer

3
624074/07 3-1
Hardware options
3.1 Set up CO
2
sensor monitoring 3-3
3.1.1 Enabling CO
2
3-5
3.1.2 CO
2
mainstream measurement 3-5
3.1.3 CO
2
sidestream measurement 3-9
3.2 SpO
2
monitoring options 3-14
3.3 Installing the pneumatic nebulizer 3-15
3.4 Integrated Aeroneb
®
system 3-17
3.4.1 Introduction 3-17
3.4.2 Indications for use 3-18
3.4.3 System description 3-18
3.4.4 Enabling the Aeroneb option 3-20
3.4.5 Connecting the nebulizer 3-20
3.4.6 Continuous nebulization 3-22
3.4.7 Installation in breathing circuit 3-24
3.4.8 Adding medication 3-26
3.4.9 Configuring nebulization 3-27
3.4.10 Functional test 3-29
3.4.11 Alarms 3-30
3.5 IntelliCuff
®
3-30
3.5.1 Introduction 3-30
3.5.2 Indications for use 3-30
3.5.3 System description 3-30
3.5.4 Enabling the integrated cuff pressure
controller option 3-33
3.5.5 Operation of the automatic cuff
pressure controller 3-34
3.5.6 Operating modes 3-35
3.5.7 Alarms 3-39