Hamilton G5 - Interface: Configuring the I:E Timing Outlet

J-14 624074/07
J Configuration
J.9 Interface: Configuring the I:E timing outlet
The Interface window (Figure J-12) lets you configure the I:E
outlet.
Figure J-12. Interface window
To configure the interface:
1. Determine the desired relay positions (
Open or Closed ) for
each of the three breath cycle phases (
Insufflation,
Pause,
and Exhalation ).
2. Select a relay position.
3. Touch
Close .
4. If you are done configuring the ventilator, touch
Close/
Save
to save your selections.
See Appendix I, Communication interface, for information on
the communications interface option.