Hamilton G5 - 2 Preparing for Ventilation

2
624074/07 2-1
Preparing for ventilation
2.1 Introduction 2-2
2.2 Installing and positioning the Ventilation
Cockpit 2-4
2.2.1 Mounting the Ventilation Cockpit 2-4
2.2.2 Adjusting the Ventilation Cockpit
(tilt and swivel) 2-6
2.3 Installing the patient tubing support arm 2-7
2.4 Installing the humidifier 2-8
2.4.1 Connecting and attaching the
humidifier 2-9
2.5 Installing the modules (CO
2
, SpO
2
, Aeroneb,
HAMILTON-H900 humidifier) 2-12
2.6 Verifying the oxygen cell installation 2-13
2.7 Installing the patient breathing circuit 2-14
2.8 Using the auxiliary pressure (Paux)
measurement 2-22
2.9 Using an expiratory filter 2-23
2.10 Connecting to AC power 2-24
2.11 Using the optional power strip 2-25
2.12 Using the backup batteries 2-25
2.12.1 Introduction 2-26
2.12.2 Replacing the optional extended
battery pack 2-28
2.13 Connecting gas supplies 2-29
2.14 Connecting to an external patient monitor
or other device 2-32
2.15 Starting up the ventilator 2-33
2.16 Shutting down the ventilator 2-34
2.17 Ventilation cockpit navigation guidelines 2-35