Hamilton G5 - Options Window; Options: Activating Software and Hardware; Options; Options: Activating Software and Hardware Options

624074/07 J-13
J.8 Options: Activating software and hardware
options
NOTE:
In addition to activating CO
2
and/or SpO2, you must
also enable the option(s) in the
System window
(Section 4.3.3).
To view the Options window (Figure J-11), touch the Options
button. Select and activate software and hardware options.
Figure J-11. Options window
To configure options:
1. Enter the software option activating code from the accom-
panying license. Select
Enter .
2. Repeat step 1 until all options are entered.
3. Select the desired hardware option. Press
Enter .
4. Touch
Close .
5. If you are done configuring the ventilator, touch
Close/
Save
to save your selections.