Hamilton G5 - Enabling the Aeroneb Option; Connecting the Nebulizer

3-20 624074/07
3 Hardware options
3 The Aerogen module can be inserted into a free module
bay on the device ventilator. The module is powered by the
ventilator and provides one socket (green) to connect the Aero-
gen Module Cable. Also there is a combined Aerogen Module
with a blue socket for SpO
2
monitoring and a green socket to
connect a Aeroneb nebulizer.
3.4.4 Enabling the Aeroneb option
To operate Aeroneb, select Configuration -> Options .
Figure 3-11. Selecting Aeroneb
3.4.5 Connecting the nebulizer
Before use, you must perform a functional test of the Aeroneb
System. This is described in the functional test section of this
chapter.