624074/07 F-13
1 Masimo adapter, which contains the oximeter hardware
2 Cable connection ports
3 SpO
2
sensor (probe) and cable
4 Patient cable (connects to adapter and probe (sensor))
5 Adapter cable (connects the adapter to SpO
2
module on
ventilator)
For information on enabling, configuring, and connecting the
oximeters, see Sections F. 8 to F. 9.
F. 2 S pO
2
monitoring options
The HAMILTON-G5 supports SpO
2
pulse oximeters from two
manufacturers: Masimo
®
and Nihon-Kohden
®
. The system
comes standard with a pulse oximeter, from whichever manu-
facturer is chosen when ordering.
Table F-1 describes the options available with each oximeter.
Details on each option are provided in this chapter.
Table F-1. SpO
2
pulse oximeter options
Options, Mea-
surements
Nihon-Koh-
den
Masimo SET
SpO
2
1
Masimo Rain-
bow
2
SET
SpO
2
XX
Pulse rate
XX
Plethysmogram
XX
Perfusion Index
(PI)
X
SpCO (carboxy-
haemoglobin)
X
SpMet (Methae-
moglobin)
X
SpHb (total hae-
moglobin)
3
X
To Next Page
Loading...