2-32 624074/07
2 Preparing for ventilation
Figure 2-21. HAMILTON-G5 inlet fittings
1 Oxygen inlet fitting
2 Heliox inlet fitting
3 Air inlet fitting
If you intend to use heliox, select the appropriate gas source in
the
System-> Gas source
window. In standby, you can
switch choices between air and heliox without exchanging the
gas hoses.
2.14 Connecting to an external patient monitor or
other device
NOTE:
All devices connected to the HAMILTON-G5 must be for
medical use and meet the requirements of standard
IEC 60601-1.
To Next Page
Loading...