5
624074/07 5-1
Ventilator settings
5.1 Introduction 5-2
5.2 Setting up the patient 5-3
5.3 Patient window 5-5
5.3.1 Patient window: Changing patient
gender and height 5-5
5.3.2 Patient window: Ventilation timer 5-6
5.4 Modes window: Setting the ventilation mode 5-7
5.5 Controls window: Settings including apnea
backup ventilation 5-10
5.5.1 Adjusting and confirming control
settings without mode change 5-10
5.5.2 Adjusting and confirming control
settings after mode change 5-12
5.5.3 About apnea backup ventilation 5-14
5.6 Additions window 5-15
5.6.1 Sigh: Enabling/disabling the sigh
function 5-16
5.6.2 TRC: Setting tube resistance
compensation 5-17
5.6.3 Table of control settings, additions,
and ranges 5-19
5.7 Alarms window 5-27
5.7.1 Limits: Setting alarm limits 5-28
5.7.2 Loudness: Adjusting alarm loudness 5-30
5.7.3 Buffer: Viewing active alarms 5-31
5.7.4 Table of alarm limit settings and
ranges 5-31