Hamilton G5 - Loudness: Adjusting Alarm Loudness; Alarm Limits 2 Window

5-30 624074/07
5 Ventilator settings
Figure 5-11. Alarm Limits 2 window
2. To set an alarm individually, select the alarm button and
adjust the value. Repeat for any other alarm.
To set the alarms automatically, select the
Auto button.
3. Close the window.
5.7.2 Loudness: Adjusting alarm loudness
NOTE:
• If the alarm loudness was set to < 5 before the venti-
lator was powered off, the loudness setting will
default to 5 when the HAMILTON-G5 is powered on.
• If you decrease the alarm loudness during the night
shift, do not forget to return it to its daytime setting!
Adjust the alarm loudness as follows:
1. Open the
Alarms -> Loudness window (Figure 5-12).
2. Adjust the
Loudness value as desired.
3. Optionally, select
Test to check the loudness.