Hamilton G5 - Masimo Data Acquisition Settings

F-34 624074/07
F Pulse oximetry
3. Select Close and Close/Save .
F.8.1.2 Table of Masimo data acquisition settings
Table F-10 describes the SpO
2
data acquisition options and
their settings.
Table F-10. Masimo data acquisition settings
Parameter Description Options
SpO
2
sensor
type
Select the SpO
2
sensor manufac-
turer.
Nihon-Kohden (default)
Masimo
Line frequency Power line frequency. 50 Hz
60 Hz (default)
SpHb
averaging
The length of time over which to
collect data to include in the
average calculation.
Long (default)
Medium
Short
SpHb mode Haemoglobin measurement. Arterial (default)
Venous
SbHb precision Precision level of the displayed
data.
0.1 (default)
0.5
1
SpHb unit Unit of measurement for the
SpHb parameter.
g/dL (default)
mmol/L
SpHb measure-
ment
Monitoring method. For details
on each method, see Section
F.2.1.1.
Continuous
Spot Check (default)