Hamilton G5 - Continuous Nebulization; Continuous Doses

3-28 624074/07
3 Hardware options
by the operator. Also, the operator can chose to set the syn-
chronization of aerosol delivery.
Figure 3-19. Intermittent nebulization
2. To start an operator defined nebulization cycle, add the
medication and press the
Nebulizer key on the ventila-
tion cockpit.
During active nebulization the key is illuminated (green) to
indicate a nebulization cycle is in progress. In
System ->
Nebulization
a timer indicates the elapsed nebulization
time.
3.4.9.2 Configuring nebulization for continuous doses
1. Open Systems -> Nebulizer and choose Aeroneb or
Pneumatic as the active nebulizer type. Also, the operator
can chose to set the synchronization of aerosol delivery.
Figure 3-20. Continuous nebulization