Hamilton G5 - Attaching the Adapter Cable; Connecting the Ventilator Spo Cable to the Ventilator (Masimo

F-42 624074/07
F Pulse oximetry
F.9.1.2 Attaching the adapter cable
One end of the adapter cable is permanently attached to the
Masimo adapter.
Attach the connector of the adapter cable to the SpO
2
module
on the ventilator. Ensure the cable “snaps“ into place (Figure
F-16).
Hold the connector (not the cable) to connect or disconnect
the adapter cable to the module. If you hold the cable, this can
cause cable discontinuity or break the cable.
Figure F-16. Connecting the ventilator SpO
2
cable to the
ventilator (Masimo)