624074/07 2-11
Figure 2-8. Power, communication connections (bottom)
1 AC mains power socket
2 COM port and communications cable
1. Attach the power cord to the power socket on the bottom
of the humidifier. For details on AC power requirements,
refer to the HAMILTON-H900 Operating Instructions. See
Figure 2-8.
2. Attach the communication cable to the COM port on the
bottom of the humidifier. See Figure 2-8.
3. Attach the humidifier to the trolley or other designated
location by sliding the bracket on the rear of the humidifier
onto the mounting bracket from the top down.
For details on attaching the adjustable-height mount to the
trolley, see the Adjustable Humidifier Kit Installation Guide.
4. Connect the humidifier power cable to AC mains power.
For details on AC power requirements, refer to the HAMIL-
TON-H900 Operating Instructions.
5. Connect the communications cable to the RS-232 port on
the ventilator. See Figure 2-9.
To Next Page
Loading...