F-40 624074/07
F Pulse oximetry
F.9.1.1 Attaching the adapter to a rail
The adapter comprises two pieces that fit together and then
attach to a standard rail. Both cables connect to the adapter.
Figure F-12. Adapter on rail, fully assembled (Masimo)
To attach the adapter to a rail:
1. Hold the adapter in one hand, and with the other, lift up
the top part of the adapter by placing your fingers in the
grooved indentations and gently squeezing the sides
together while lifting.
Figure F-13. Adapter, open and closed views
2. Fit the adapter over the rail with the bottom part of the
adapter behind the rail, and the top part in front. Be sure
the rail fits snugly against the indentation in the adapter.
To Next Page
Loading...