F-12 624074/07
F Pulse oximetry
NOTE:
• Use components specified by HAMILTON MEDICAL
only.
• DO NOT use or store outside of specified environ-
mental conditions.
• HLI is not available with the Masimo pulse oximeters.
The SpO
2
sensor (probe) is connected to an adapter to mea-
sure patient’s SpO
2
and pulse rate and send measured data
(SpO
2
real time value, plethysmograph, pulse rate and status)
to the device. Figure F-1 shows the Masimo pulse oximeter
parts.
Figure F-1. Masimo SpO
2
pulse oximeter components
To Next Page
Loading...