Hamilton G5 - Installing and Positioning the Ventilation Cockpit; Mounting the Ventilation Cockpit

2-4 624074/07
2 Preparing for ventilation
2.2 Installing and positioning the Ventilation Cock-
pit
2.2.1 Mounting the Ventilation Cockpit
CAUTION
Handle the touchscreen with care. Do not pull on
or place stress on the cable.
With the correct mounting rails you can mount the Ventilation
Cockpit to the top, front, or side of the ventilation unit or to
a hospital rail system (Figure 2-1). Dismount and reinstall the
cockpit as follows:
1. If necessary, disconnect the Cockpit from the ventilation
unit by pushing on the cable release tab with a small screw-
driver or similar utensil to disengage cable (Figure 2-2).
2. Dismount the Cockpit by loosening the knob in the clamp
assembly (Figure 2-3).
3. Reinstall the Cockpit by positioning it over the rail or top
mounting assembly and tightening the knob. Reconnect
the cable as necessary.