Hamilton G5 - P;V tool maneuver option; Introduction; Procedure; References

9
624074/07 9-1
P/V tool maneuver option
9.1 Introduction 9-2
9.1.1 Overview 9-2
9.1.2 Required conditions for use 9-3
9.1.3 Indication for use 9-3
9.1.4 Contraindications for use 9-4
9.1.5 How the P/V Tool works 9-4
9.2 Procedure 9-5
9.2.1 Performing the maneuver 9-6
9.2.2 Using the cursor feature to graphically
analyze the plot 9-12
9.2.3 Analyzing the curve 9-14
9.2.4 Selecting plot type 9-17
9.2.5 Using the Reference feature to review
stored curves 9-18
9.2.6 Flow sensor and breathing circuit
check 9-19
9.2.7 P/V Tool against P/V Tool Pro 9-23
9.3 References 9-23