Hamilton G5 - Pulse oximetry; Introduction; SpO2 monitoring options; Monitored parameters and settings

F
APPENDIX
624074/07 F-1
Pulse oximetry
F.1 Introduction F-3
F.2 SpO2 monitoring options F-13
F.2.1 About Masimo SET and Masimo
Rainbow SET F-14
F.2.2 About Nihon-Kohden F-17
F.3 Monitored parameters and settings F-17
F.3.1 About the Masimo SpO
2
Raw
parameter measurements F-19
F. 4 Sp O
2
pulse oximeter data display F-19
F. 4 .1 S pO
2
parameters in the Monitoring
window F-20
F.4.2 Quality index indicators F-21
F.5 Working in SpHb Spot Check mode F-23
F.5.1 Performing an SpHb spot check F-25
F.6 Alarms F-26
F.6.1 Masimo SpO
2
alarm delay F-26
F. 6 .2 S pO
2
Alarm Limits window F-27
F.6.3 Table of pulse oximeter-related
alarm settings F-27
F.7 Masimo information codes and
troubleshooting F-29
F.7.1 About the pulse oximeter information
codes F-30
F.8 Configuring the oximeters F-32
F.8.1 Configuring the Masimo options F-32
F.8.2 Configuring the Nihon-Kohden
options F-38