Hamilton G5 - Page 243

624074/07 7-31
SpCO (%)
1
Monitoring 2 With Masimo pulse oximeter.
Carbon monoxide concentration in arterial
blood. For details, see Appendix F, Pulse oxime-
try.
Available in Continuous or Spot check mode.
See Section F.2.1.1.
SpHb
(g/dL)
3
Monitoring 2 With Masimo pulse oximeter.
Total haemoglobin in arterial blood. For details,
see Appendix F, Pulse oximetry.
Available in Continuous or Spot check mode.
See Section F.2.1.1.
SpHb
(mmol/L)
3
Monitoring 2 With Masimo pulse oximeter.
Total haemoglobin in arterial blood. For details,
see Appendix F, Pulse oximetry.
Available in Continuous or Spot check mode.
See Section F.2.1.1.
SpMet (%)
3
Monitoring 2 With Masimo pulse oximeter.
Methaemoglobin concentration in arterial
blood. For details, see Appendix F, Pulse oxime-
try.
SpO
2
(%) Monitoring 2 SpO
2
is an indirect measurement of oxygen sat-
uration in the blood. It is measured by the SPO
2
sensor and is expressed in a percentage format.
SpO
2
/FiO
2
Monitoring 2 100*SpO
2
(%)/FiO
2
(%); If SpO
2
> 94% the
value of SpO
2
/FiO
2
becomes OFF value. For fur-
ther information see Appendix F, Pulse oxime-
try.
SpOC
(mL/dL)
3
Monitoring 2 With Masimo pulse oximeter.
Calculated measurement of amount of
oxygen in arterial blood. For details, see
Appendix F, Pulse oximetry.
Table 7-1. Monitored parameters
Parame-
ter (unit)
Monitoring
Window
Definition