A-40 624074/07
A Specifications
Oxygen cell life 1 year or 5000 hours nominal. Actual cell life
depends on operating environment. Opera-
tion at higher temperatures or higher oxy-
gen concentrations shortens cell life.
Alarm loudness 50 to 85 dB(A) at 1 m
Tests and special functions Tightness test, oxygen cell calibration,
Flow Sensor calibration, manual breath,
inspiratory/expiratory hold maneuver,
P/V Tool maneuver, Paux measurement,
internal pneumatic nebulization (30 min,
6 l/min at 1 bar/100 kPa/14.5 psi), communi-
cations interface (optional), internal battery,
extended battery pack (optional)
Ventilator IPX1 classification (Degree of protection
provided by enclosure)
Optional CO
2
sensor related specifications
Water resistance (sensor head
but not the connector)
IPX4 classification (splash-proof)
Cable length 3 m (10 ft)
Optional SpO
2
sensor related specifications
Water resistance (SpO
2
probe
head but not the connector)
IPX4 classification (splash-proof)
•SpO
2
probe (all reusable types)
IPX1 classification
•SpO
2
sensor
•SpO
2
sensor module
Cable length 1.6 m (5.25 ft)
Table A-13. Other technical data
Parameter Specification
To Next Page
Loading...