1-8 624074/07
1 General information
The P/V Tool Pro
®
feature is an automated process that lets
you measure and display the inflation and deflation pressure-
volume curves of the lungs for determination of inflection
points. This option is preinstalled on the device.
The Minute Volume Adjustment feature enables automatic
control of %MinVol (Ventilation adjustment).
The PEEP Adjustment feature enables automatic control of
PEEP (as part of the Oxygenation Adjustment).
The Oxygen Adjustment feature enables automatic control
of Oxygen.
The CO
2
sensor with an associated MinVol controller feature
continuously monitors airway carbon dioxide and reports
EtCO
2
and inhaled/exhaled CO
2
for display and alarm pur-
poses.
The SpO
2
sensor is a sensor attached to the patient which
continuously monitors the oxygen saturation of the blood.
The neonatal feature lets you ventilate neonates.
Added features. These additional features are available for
the device:
•The communications interface lets you monitor the
patient from a remote workstation, transmits alarms
through a nurse call relay system, and transmits I:E timing
signals. This feature is preinstalled on the device.
•The power strip (multiple-socket outlet, MSO) provides
AC power to the VENTILAIR II medical air compressor, and
a humidifier.
• Integrated humidifier. With the use of the HAMILTON-
H900 humidifier, you can monitor and control humidifier
settings directly from the ventilator screen. The HAMILTON-
H900 also provides a breathing circuit with integrated
heater wires and temperature probe, improving ease of use.
In addition, all humidifier data can be transmitted to any
connected PDMS. You can still use other humidifiers, with-
out full system integration.
To Next Page
Loading...