1-22 624074/07
1 General information
7 Access to Patient, Additions, and Mode windows. Patient
window allows you to view/update patient data, and view the
ventilator timer; Additions window gives access to sigh and
tube resistance compensation (TRC); Mode window allows you
to update the ventilation mode.
8 Active mode, patient type, weaning, recruitment and
apnea backup status (if active).
9 Freeze button. Lets you freeze or unfreeze graphics.
10 Trend button. Additional option to display trends in
INTELLiVENT
®
-ASV. (Available as an option.)
11 View cursor. Changes between oxygenation and ventilation
horizons, maps and guides.
12 IntelliCuff button. Access to automatic cuff pressure control-
ler settings. (Available as an option.)
13 Heliox icon. Indicates the heliox option is active.
14 Controller buttons for ventilation (%MinVol) and oxygen-
ation (PEEP/CPAP and oxygen). When these are functioning
automatically they pulse with a blue circle.
15 Input power. Shows all available power sources. The framed
symbol indicates the current source (AC = mains, INT = internal
battery, EXT = extended battery pack). The green part of the
battery symbols shows the level of battery charge, while the red
shows the level of discharge. The AC mains symbol and the
internal battery symbol are always displayed, but are crossed
out if that source is not available. The extended battery symbol
is shown only if the external battery is installed.
16 Humidifier button. Provides quick access to the Humidifier
visualization window (same as touching
System
>
Humidi-
fier
). (Available as an option.)
17 Window tabs. Open the associated windows.
18 Secondary monitoring parameters (SMP). A group of
numeric patient data. You can display other groups using the
group scrolling arrows. The data is divided into groups for dis-
play purposes.
To Next Page
Loading...