HBM MGCplus - Markings Used; Markings on the Device; The Markings Used in this Document

Markings used
Markings on the device
MGCplus A0534-30.0 HBM: public 15
2 Markings used
2.1 Markings on the device
CE mark
By way of the CE mark the manufacturer guarantees that the product com
plies with the requirements of the relevant EC directives (the Declaration of
Conformity can be found at http://www.hbm.com/HBMdoc
).
Statutory waste disposal mark
In accordance with national and local environmental protection and material
recovery and recycling regulations, old devices that can no longer be used
must be disposed of separately and not with normal household garbage.
Electrostatic sensitive devices
Components marked with this symbol can be damaged beyond repair by
electrostatic discharge. Please observe the handling instructions for electro
static sensitive devices.
Any risk of residual dangers when working with the amplifier system are
pointed out in these instructions by means of the following symbols:
2.2 The markings used in this document
Symbol Meaning
DANGER
This marking warns of an imminently threatening dangerous situation in
which failure to comply with safety requirements will result in death or
extremely serious physical injury.
WARNING
This marking warns of a potentially dangerous situation in which failure to
comply with safety requirements could result in death or serious physical
injury.