Connection
Connecting the MGCplus in a tabletop housing/rack frame
34 A0534-30.0 HBM: public MGCplus
Powering up the system
When connecting the system, the sync slaves must be connected first.
Connect the system that will work as the sync master last of all.
4.1.3 Synchronization of CP52 with CP22/CP42
The synchronization jack enables MGCplus systems with CP52 to be
synchronized with MGCplus systems with CP22/CP42.
To do this note the following points:
Both CP42 and CP52 can be the synchronization master. CP22 can only be
a synchronization slave.
Use the following cables for this:
1-KAB2126-2: CP52 (master) to CP22/CP42 (slave)
1-KAB2127-2: CP42 (master) to CP52 (slave)
The synchronization status for CP22/CP42 is indicated by a multicolor LED.
To Next Page
Loading...
