HBM MGCplus - Set Access for Operator

System
Password
240 A0534-30.0 HBM: public MGCplus
10.1.3 Set access for operator
If you are still in the Password setup window, continue with item 4.
1. Use the Switch key
to switch to Setup mode
2. Press
.
3. In the pull-up menu select Password and confirm with
.
4. Use
to select the set... button symbol and confirm with .
5. Use
to choose the desired No/Yes selection field and confirm with
.
6. Use
to select the desired setting and confirm with .
7. Press
(so you will go immediately to the OK key) and confirm with
.
To return to measuring mode, press the Switch key
and confirm the
confirmation prompt with
.
Access:
User:
Password:
new...
change...
set...
delete...
PASSWORD
Password protection
Access rights for operator
System Password Yes
Save/load No
Recording No
Interfaces No
Print No
Language No
Time No
Display Display format No
F−keys No
Channel names No
Amplifier Transducer No
Signal conditioning No
Display No
Analog outputs No
Switch No
Options Control inputs No
Limit switch No
Limit value combination No
Peak−value memory No
Version No
Off 
OK Cancel