HBM MGCplus - Define New User

System
Password
238 A0534-30.0 HBM: public MGCplus
10.1.1 Define new user
1. Use the Switch key
to switch to Setup mode
2. Press
.
3. In the pull-up menu select Password and confirm with
.
4. Use
to select the new... button symbol and confirm with .
5. In the User edit field, enter the new user name and confirm with
.
6. Use
to select the Password edit field, enter your password and
confirm with
.
7. Use
to select the Access selection field, choose the desired access
authorization and confirm with
.
8. Use
to select the OK button symbol and confirm with .
Access:
Operator
User:
Password:
Add user
Operator
System
OK Cancel
Access:
User:
Password:
new...
change...
set...
delete...
PASSWORD
Display Amplifier OptionsSystem
Password
Save/load
Recording
Interface
Print
Language
Time