System
Recording series of tests
248 A0534-30.0 HBM: public MGCplus
10.3 Recording series of tests
With the MGCplus you can configure up to 17 programs for recording series
of tests (16 on the hard disk) and save the configuration.
The recording is saved in the RAM of the communication processor or to in
storage medium (optional). The following types are supported:
S Formatted in the FAT‐32 file system. Other file systems (for example
NTFS) are not supported.
CAUTION
Prevent electrostatic discharge! The storage medium can be damaged by
static discharge. Touch a grounded object before installation or wear an
approved grounding armband.
The parameters for these series of tests can be adjusted either with the
AB22A display and control panel or with HBM's "MGCplus Assistant" PC
software.
USB mass storage
To Next Page
Loading...
