HBM MGCplus - Page 171

Measuring
Adapting to the transducer
MGCplus A0534-30.0 HBM: public 171
13. In the Decimal places edit field enter the desired number of decimal
places and confirm with
.
14. In the Step selection field select the desired step and confirm with
.
Information
The step refers to the last decimal place of the display value.
Example:
Entry 10.0 C
 Step 1 means display jumps every 0.1 C
 Step 5 means display jumps every 0.5 C
Entry 50.000 C
 Step 1 means display jumps every 0.001 C
 Step 5 means display jumps every 0.005 C
15. Use the Switch key
to go to measuring mode and confirm the con
firmation prompt with
.
Unit Abs
Decimal places
Display range from
to
Step
DISPLAY CHANNEL1
100 
10.000 V
−10.000 V
3 ...
V 
3
AmplifierSystem Display Options
Transducer
Signal conditioning
Display
Analog outputs
Switch