Measuring
Potentiometric transducers
188 A0534-30.0 HBM: public MGCplus
15. In the Step selection field select the desired step and confirm with .
16. Use to go to measuring mode and confirm the confirmation prompt
with
.
Information
The step refers to the last decimal place of the display value.
Example:
Entry 10.0mm
Step 1 means display jumps every 0.1 mm
Step 5 means display jumps every 0.5 mm
Entry 10.000mm
Step 1 means display jumps every 0.001 mm
Step 5 means display jumps every 0.005 mm
To Next Page
Loading...
