Hologic Panther System - Table 41. Results Screen Descriptions

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
74
Overview
Screen Location Description
1. Filters Select this button to define criteria to filter data in the
table (see Viewing Results on page 150).
2. Verify Select this button to verify selected test results (see
Verifying Results on page 155) if the Enable Result
Verification configuration is enabled from the Admin
screen.
3. Edit Sample ID Select this button to edit the sample ID of a test result
with an auto-generated or manually entered SID
(see Editing Auto-Generated or Manually Entered
Sample IDs on page 155).
4. Export Raw Data Select this button to export the kinetic data of
selected results (see Exporting Raw Data on page
157).
5. Export LIS Data Select this button to export the LIS data for the
selected results (see Exporting LIS Data on page
157).
6. Send results to
LIS
Select this button to export the results data to the LIS
(see Sending Results to LIS on page 158).
7. *Export Viral Data Select this button to export the data for the selected
real-time assay test order results (see Export Viral
Data on page 159).
8. *Curve Data Select this button to view the Sample Curve Report
for the real-time assay test order result (see Sample
Curve Report on page 152).
9. Details Select this button to view additional information for
the selected test result (see Result Details on page
153).
10. User Comment Select this button to add a note for the selected
invalid control or calibrator (see User Comment on
page 154).
* These buttons are only visible under certain system software configurations.
Table 41. Results Screen Descriptions