Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
240
System Administration
3. Clear messages from the screen, toggle between message types ASTM 1394 and
ASTM 1381, or manually request for test orders to be sent from the LIS from the LIS
Messages screen (see Manually Download Test Orders on page 121).
Operator Management
Use the Operator Management screen to add and edit operator accounts. Only an
administrator can alter operator accounts.
The following table provides the information displayed for each operator on the Operator
Management screen.
Data Field Description
Enabled The cell displays current activity status of the operator
account.
Operator
Name
The operator's full name.
User Name The operator user name that will appear in the Status
Panel at the bottom of the screen when logged on.
Initials The operator initials that will appear in reports.
Role The level of seniority assigned to the operator account.
Password
Expires
The date the account’s password is set to expire.
Table 111. Operator Management Options
Enable/Disable Operator Accounts
To enable/disable an operator account:
1. From the Operator Management screen, select the operator account to be altered.
2. Check or clear the check in the Enabled cell to either enable or disable the
operator account.
Adding Operator Accounts
To create a new operator account:
1. From the Operator Management screen, select Add.
An Add Operator window opens.
To Next Page
Loading...
