Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
229
System Administration
5. Select Save. A Panther window appears with a message. Select OK.
6. Shut down and restart the software by selecting the Instrument Shutdown button on
the Logoff/Shutdown screen when in the Setup or Ready state. From the Desktop
Shield, restart the software by selecting Panther.
Report Management
Use the options available in the Report Management expansion menu to configure
temperature monitoring in the Maintenance Checklist, the report export directory, and the
site information available on reports.
Select and configure the following options within the menu:
Option Description
Enable
Temperature
Check
Reporting
Check this cell to enable temperature check reporting on the
Maintenance Checklist.
Additional instructions provided below.
Report Export
Directory
Select this field to adjust the export file destination for all reports.
Additional instructions provided below.
Default Paper
Size
This functionality is not available in this software version. The
reports will print appropriately for both "A4" and "Letter" page
sizes.
Site
information for
reports
Select these fields to adjust the contents of the report headers with
the virtual keyboard. This information is displayed in the header of
all reports.
Table 104. Report Management Options
Enable Temperature Check Reporting
Check the Enable Temperature Check Reporting cell within the Report Management
drop-down on the System Configuration screen to configure the system to record
temperature checks. When configured, the system records a temperature check on each
day that processing is initiated. The operator logged in at the time the system transitions
to the Assay Processing state is credited for the temperature check within the Temp
Check column on the Maintenance Checklist.
Report Export Directory
To set the report export directory:
1. From the expanded Report Management menu on the System Configuration screen,
select the Report Export Directory field.
To Next Page
Loading...
