Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
133
System Operation
System Alarm
The system produces two (2) levels of audible alarm depending upon the
severity of the issue. Refer to the Messages screen to silence the alarm and
view information regarding the reason for the alarm (see Messages Screen on
page 53).
Monitoring the System through Software
Monitor the system software through the numerous software displays. The following
items display status information for the system. Monitor the information provided by
these items to ensure the proper functionality of the system.
Monitoring the Menu Bar
Monitor the buttons on the Menu Bar for a change in status according to the
following table.
Display Item Description
Messages The button, located in the Menu Bar, displays the
number of system messages. The black number on the
button represents the total number of Information
messages currently displayed on the Messages
screen. The yellow number represents the total number
of Warning messages currently displayed. The red
number represents the total number of Error messages
currently displayed.
Pending The button, located in the Menu Bar, displays the
number of pending messages on the Pending screen.
This button flashes yellow when Pending messages
remain on the Pending screen.
Tasks The button, located in the Menu Bar, flashes yellow
when one of the Task Buttons on the Tasks screen is
flashing red.
Test Orders The button, located in the Menu Bar, displays the
number of reflex test orders that require the user to
reload the associated specimen tube. This button
flashes yellow when reflex test orders remain on the
Test Orders screen.
Table 60. Menu Bar Status Descriptions
To Next Page
Loading...
