Hologic Panther System - Assay Reagent Loading Screen; Table 34. Assay Reagent Bay Screen Descriptions

Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
63
Overview
Screen Location Description
1. Reagent Rack
Graphic
Graphical display of the four (4) lanes of the Reagent
Bay.
2. Rack Details/Edit Select this button to access the Assay Reagent
Loading screen (see Assay Reagent Loading Screen
on page 63).
3. Change Scan
Lane
Select this button to focus the Reagent Bay Barcode
Scanner on the selected Reagent Bay Lane.
4. New/Activate Lot Select this button to enter assay reagent Master Lot
information (see Add a New Master Lot on page
107).
5. Inactivate Lot Select this button to inactivate an assay reagent
Master Lot (see Inactivate a Master Lot on page 108).
6. Run New
Ctrls/Cals
Select this button to require a new set of controls or
calibrators for additional sample processing (see
Run New Controls/Calibrators on page 115).
7. TCR Carousel
Graphic
Graphical display of the four (4) positions of the TCR
Carousel.
Table 34. Assay Reagent Bay Screen Descriptions
Assay Reagent Loading Screen
To access the Assay Reagent Loading screen:
l Select the graphic of a Reagent Bay Lane on the Panther Assay Reagent Bay screen
(see Assay Reagent Bay Screen on page 62) and then select the Rack Details/Edit
button.
l Double-click on the Reagent Bay Lane graphic on the Panther Assay Reagent Bay
screen.
Operators are automatically directed to this screen if there is an assay reagent kit-related
error during the loading process.
Refer to the Assay Reagent Loading screen for specific Panther assay reagent kit
information.