Panther System
®
Operator’s Manual
AW-17791-001 Rev. 002 (EN)
149
System Operation
Figure 74. Specimens Loaded Panel—With LIS (Example)
Monitoring Control/Calibrator Status
Status Meaning
Loaded Control/calibrator set has been
loaded.
Valid Processing of the control/calibrator set
is complete and the results are valid.
Invalid Control/calibrator set failed due to a
hardware or assay validation failure.
In-Process Control/calibrator set is processing.
Expired Control/calibrator results test validity
period has expired.
Pending A control or calibrator assigned a
Pending label will be designated as
white on the rack display.
Table 70. Control/Calibrator Status Definitions
Assay Reagents Panel
The control/calibrator set status can also be monitored from the Assay Reagents
panel on the Run Status screen. The Expiration column displays the expiration
countdown time of the control/calibrator set associated with the assay reagent
kit.
To Next Page
Loading...
